Infinity Edge Pool Covers

Nowra Local Pools also operating as Turner’s Pools & Excavations installed this absolutely awesome pool at Culburra Beach recently.

The attention to details is amazing which shows in the end result.

It is often misunderstood how pool covers work with infinity edge pool. The cover does not flow over the edge. It sits inside the body of the pool and stops just before the infinity edge. In high wind areas, such as this beach front pool, a wind skirt will be required.

The wind skirt is a weighted rope that is added to the pool cover and it weighs down the edge of the cover so it sits just below the water line.  In this way the wind is unable to pick up the pool cover and blow it off.

In this location there is absolutely no way you could use an above ground roller, as it would spoil the beauty and be blown around by heavy on shore winds. The Aussie UnderCover® is just perfect.

Not every infinity edge pool will require a wind skirt. If you are going down this path, please send us your plans early in the development stage so we can advise the best option for your location.

Turner’s Pools & Excavations supplies and installs Aussie UnderCover® systems in the Shoalhaven & South Coast.

Future Display: 20 Bellevue Street, South Nowra

Phone: (02) 4423 0973


Installer & Pool Builder: Turner’s Pools & Excavations (Nowra Local Pools)

Pool:  Compass Pool – Xtrainer 11.8 plus beach area

Kit Size: Large

Installation Type:  Concrete pit & tile

Lid Frame Finish:  20mm tile

Weight: 45kg sqm

Manual or Semi Remote:  Manual

Pool Cover:  Daisy – 525 Titanium Blue with wind skirt